 (Home) > Settings > Install Channels > Antenna/cable installlation > Search for channels > Advanced reinstall

1. Select Start now and press OK.
2. Select Advanced reinstall to do a full re-installation which takes you through each step.
3. Select Start and press OK.
4. Select the country where you are now and press OK.
5. Select Antenna (DVB-T) or Cable (DVB-C), and select one item you need to re-install.
6. Select Digital and analogue channels, Only digital channels, or Only analogue channels.
7. Select Settings and press OK.
8. Press  Reset to reset, or press  Done when complete the settings.

Frequency scan
Select the method of searching for channels.

• Quick: select the faster method and use the predefined settings used by most cable providers in your country.
• Full: If this results in having no channels installed or if some channels are missing, you can select the extended Full method. This method will take more time to search for and install channels.
  
• Advanced: If you received a specific network frequency value to search for channels, select Advanced.

Frequency step size
The TV searches for channels in steps of 8MHz.
If this results in having no channels installed or if some channels are missing, you can search in smaller steps of 1MHz. Using the 1MHz steps will take more time to search for and install channels.

Network frequency mode
If you intend to use the fast Quick method in Frequency scan to search for channels, select Automatic. The TV will use 1 of the predefined network frequencies (or HC - homing channel) as used by most cable providers in your country.
If you received a specific network frequency value to search for channels, select Manual. 

Network frequency
With the Network frequency mode set to Manual, you can enter the network frequency value received from your cable provider here. To enter the value, use the number keys.

Network ID
Enter the network ID supplied by your cable provider. 

Symbol rate mode
If your cable provider did not give you a specific symbol rate value to install the TV channels, leave the Symbol rate mode setting on Automatic.
If you received a specific symbol rate value, select Manual. 

Symbol rate
With the Symbol rate mode set to Manual, you can enter the symbol rate value by using the number keys.

Free / Scrambled
If you have a subscription and a CAM - Conditional Access Module for pay TV services, select Free + scrambled. If you did not subscribe to pay TV channels or services, you can select Free channels only.