Make the Connection - Wireless

 (Home) > Settings > All settings > Network > Connect to network > Wireless

1. In the list of found networks, select on your wireless network. If your network is not in the list because the network name is hidden (you switched off the SSID broadcast of the router), select Add New Network to enter the network name yourself.
2. Depending on the type of router, enter your encryption key - WEP, WPA or WPA2. If you entered the encryption key for this network before, you can select OK to make the connection immediately.
3. A message will be shown when the connection is successful.

Make the Connection - WPS

 (Home) > Settings > All settings > Network > Connect to network > WPS

If your router has WPS, you can directly connect to the router without scanning for networks. If you have devices in your wireless network that use the WEP security encryption system, you cannot use WPS.

1. Go to the router, press the WPS button and return to the TV within 2 minutes.
2. Select Connect to make the connection.
3. A message will be shown when the connection is successful.

Make the Connection - WPS with PIN Code

 (Home) > Settings > All settings > Network > Connect to network > WPS with PIN Code

If your router has WPS with a PIN code, you can directly connect to the router without scanning for networks. If you have devices in your wireless network that use the WEP security encryption system, you cannot use WPS.

1. Write down the 8-digit PIN code shown on screen and enter it in the router software on your PC. Consult the router manual on where to enter the PIN code in the router software.
2. Select Connect to make the connection.
3. A message will be shown when the connection is successful.